Red custom hockey pant shell hanging beside a matching red and white #23 jersey, with hockey pants on the bench below

What Is a Hockey Pant Shell? Fit, Fabric, and Sizing

By the Puck Drop Prints team. Updated November 2026.

Quick answer

  • A pant shell is an unpadded fabric cover worn over hockey pants
  • Made from Oxford fabric, sized on waist, length and hip
  • $35 each with a team order, or inside a $100 Sublimated Uni Kit (jersey, socks, shell)
  • Lead time: 4 to 5 weeks of production after proof approval (5 to 6 for tackle twill), then 3 to 5 days of shipping

A hockey pant shell is a lightweight fabric cover that pulls on over your hockey pants so an entire team looks like one team. It adds no padding. Puck Drop Prints publishes 27 shell sizes across three charts, nine player, nine goalie, and nine roller, with waist, length, and hip measured in inches.

That is the whole product. It is a cover. It is not protection, it is not a girdle, and it will not make you better at backchecking.

What it will do is stop your team from looking like a garage sale. Twelve guys in twelve different hand-me-down pants, three of them held together with tape, is a look. Just not the one on the poster.

What is a hockey pant shell, exactly?

A hockey pant shell is an unpadded fabric shell worn over hockey pants to give a team a matching, decorated exterior. It has no protective foam, no hard caps, and no internal padding of any kind. The pants underneath still do all the work of keeping your hips and thighs intact.

Player pulling a navy pant shell over his padded hockey pants in the locker room

Think of it the way you think of a jersey. Your shoulder pads do the protecting. The sweater does the looking-like-a-team. A shell is the same idea, applied from the waist down.

Shells pull on over the pants and sit snug against them, which is why sizing runs off the pants, not off your jeans. More on that below, because it is the single thing people get wrong.

Pro and junior teams have worn them for decades. It is why NHL pants look uniform and sharp on television while the actual pants underneath are a mix of models, vintages, and personal preferences that would never match otherwise.

Pant shell vs. hockey pants vs. girdle, what's the difference?

A shell covers, pants protect, and a girdle protects in a different silhouette. All three can end up in one player's bag, and only one of them is decorated with your team's colors. Here is the split.

  Pant shell Hockey pants Girdle
Padding None Full, hips, thighs, tailbone, kidneys Full, close to the body
Worn Over the pants Over the base layer Under a shell, like compression shorts
Can be customized Yes, team colors, stripes, logo Rarely, and expensively No
Replaced when The team rebrands The foam packs out The foam packs out

Want the full uniform? Uni Kits are priced per player at 6+ players: Sublimated kit $100 (reg $120), Tackle Twill kit $134 (reg $154), Reversible kit $134 (reg $154), and the Roller kit (jersey + roller pants) $100. Pant shells are $35 and socks $20 on their own. See the pricing page, or start building yours in the jersey customizer.

A girdle is a padded, close-fitting protective short worn under a shell instead of traditional pants. Girdle players basically require a shell, because a bare girdle is not a look anyone wants on a Tuesday at 10:40pm.

Why do teams buy pant shells?

Three reasons, in order of how often they come up: the team wants to look uniform from the waist down, the players want to keep the pants they already like, and somebody wants a logo down the leg. A shell solves all three without asking eighteen people to buy new pants.

Rec team lined up on the blue line in matching green jerseys, socks and black pant shells

The uniformity argument is the big one. Jerseys and socks get a team 80% of the way to a real uniform, and then the pants drag it back down. Shells close that last gap for a fraction of what matching pants would cost.

The second reason matters more than people admit. Hockey pants are personal. A guy who has broken in a pair over four seasons is not switching models because the captain wants everyone in black. A shell lets him keep his pants and still match.

Third: shells are a surface. Team colors, a stripe package, a crest on the hip, a sponsor mark. It is real estate that jerseys alone do not give you.

What are hockey pant shells made of?

Puck Drop Prints shells are made from Oxford fabric, the same material most hockey pants themselves are built from. Oxford fabric is a tightly woven, basket-weave synthetic known for tear and abrasion resistance while staying light and breathable. It is the standard for anything that spends its life sliding along the boards.

That matters more on a shell than it sounds. A shell is the outermost layer on the part of your body that hits the ice most often. Thin fabric turns into a hole the first time somebody's skate finds it in a scrum.

Macro close-up of the stitched seam and woven polyester on a Puck Drop Prints jersey

Puck Drop Prints publishes fabric weights most of the category hides: 110 GSM roller, 220 GSM sublimated, 160 GSM reversible, 210 GSM tackle twill.

Weave density is the reason Oxford holds up: the basket weave puts more yarn in the same square inch, so a snag has more to chew through before it becomes a tear. It also breathes, which a coated or laminated fabric would not.

If you want the same discussion applied to jersey fabric, where Puck Drop Prints publishes actual GSM figures that most of the category hides, the sublimated vs. tackle twill vs. roller comparison covers all four weights side by side.

How do you size a hockey pant shell?

Size a shell off the hockey pants it will cover, not off your waist and not off your jersey size. Measure the pants at their widest relaxed point, then take the shell size at or just above that number. Puck Drop Prints publishes nine player sizes running from a 16-inch Youth S to a 24-inch Adult 2XL.

Every size on the Puck Drop Prints size charts lists three measurements in inches, which is more than most of the category prints at all. Here is the player chart.

Player pant shells

Nine sizes, all measurements in inches

Size A, relaxed waist B, length C, hip
Youth S 16 18 20
Youth M 17 19 21
Youth L 18 20 22
Youth XL 19 20.5 23
Adult S 20 21 24
Adult M 21 22 25
Adult L 22 23 26
Adult XL 23 24 27
Adult 2XL 24 24.5 28

Measured flat, in inches. Size off the hockey pants the shell will cover.

Two rules that save reorders. First, if a player lands between sizes, go up, a shell that is slightly generous still looks right, and a shell that is tight rides up the thigh and looks like capris by the second period.

Second, collect the measurements the same way you collect jersey sizes: once, in writing, from every player, before anyone orders anything. The guide to collecting sizes, names, and numbers has the process that works on a roster of eighteen adults who do not answer texts.

Do goalies wear pant shells?

Yes, and Puck Drop Prints publishes a separate nine-size goalie chart because goalie pants are a completely different shape. Goalie shells run wider at the waist and shorter in length than player shells at the same nominal size, an Adult Goalie M is a 22.5-inch waist against 21 inches for the player cut.

A goalie cut is a wider, shorter pattern built to fit over the bulkier equipment goaltenders wear. Order a player shell for your tendy and it will not close. Order a goalie shell for a skater and it will hang like a skirt.

Goalie pant shells

Nine goalie-cut sizes, in inches

Size A, relaxed waist B, length C, hip
Youth Goalie S 17.5 16 21.5
Youth Goalie M 18.5 17 22.5
Youth Goalie L 19.5 18 23.5
Youth Goalie XL 20.5 18.5 24.5
Adult Goalie S 21.5 19 25.5
Adult Goalie M 22.5 20 26.5
Adult Goalie L 23.5 21 27.5
Adult Goalie XL 24.5 21.5 28.5
Adult Goalie 2XL 25.5 22.5 29.5

Goalie cuts run roughly 1.5 inches wider in the waist and 2 inches shorter than the player cut at the same size.

Goalies are used to being an afterthought on team orders. They are the last size collected, the last jersey cut, and the first person blamed. Publishing a nine-size goalie shell chart is the least a shop can do.

What about roller hockey pants and Cooperalls?

Roller hockey uses a different garment entirely, and Puck Drop Prints publishes a third chart for it, nine sizes from Youth S to 3XL, sized on a waist range rather than a single number. Cooperalls are full-length hockey pants that cover the leg down to the ankle, worn over the pads instead of with socks.

They were briefly legal in the NHL in the early 1980s, got banned, and then found a permanent home in roller hockey, where there is no ice to slide across and long pants make sense.

Roller pants / Cooperalls

Nine sizes, waist range in inches

Size A, waist range B
Youth S 24 to 26 30
Youth M 26 to 28 32
Youth L 28 to 30 33
S 30 to 32 40
M 32 to 34 42
L 34 to 36 43
XL 36 to 38 45
2XL 38 to 40 45
3XL 40 45

Waist ranges as published on the Puck Drop Prints size charts. Ask on your inquiry if you need the second measurement clarified for a full team set.

Black and red Vyper custom roller hockey jersey with an all-over sublimated print

Roller kits pair with the $55 roller jersey, the lightest of the four at 110 GSM.

Note the jump between Youth L and Adult S: the second column goes from 33 to 40 inches. That is not a typo on a chart, that is what happens when a kid becomes an adult, and it is the reason you measure instead of guessing.

How do you order custom pant shells for a team?

Same path as any other team order at Puck Drop Prints: submit an inquiry, get an email back, approve a design, fill in the team spreadsheet, then production. Design first drafts come back within 3 to 5 business days, and production runs 4 to 5 weeks after final proof approval and payment, plus 3 to 5 days of shipping.

The how it works page lays out the full sequence. The step most teams underestimate is the spreadsheet, that is where shell sizes get collected alongside jersey sizes, names, and numbers, and it is where a captain who has not measured anyone loses two weeks.

On price: pant shells are $35 each with a team order, and the cheapest way to buy one is inside a Uni Kit. A Sublimated kit (jersey, socks and pant shell) is $100 per player instead of $120 bought separately, and Tackle Twill and Reversible kits are $134 instead of $154. Jerseys alone are $55 roller, $65 sublimated and $99 reversible or tackle twill on a team order of six or more. Every price is on the pricing page.

Custom 80s retro hockey socks by Puck Drop Prints

Matching custom socks are $20 a pair with a team order. Jersey, socks, shell, that is the whole uniform, and most teams stop one piece short.

If you are ordering for a season that starts in November, September is the month to start. Design plus production plus one round of revisions eats six weeks quietly, and nobody has ever regretted ordering early.

Frequently Asked Questions

What is a hockey pant shell?

A hockey pant shell is an unpadded fabric cover worn over hockey pants to give a team matching, decorated pants without replacing anyone's equipment. Puck Drop Prints builds shells from Oxford fabric, the same tightly woven material most hockey pants use. A shell adds no protection of its own, the pants underneath still handle that job.

Do you wear a pant shell over or under your hockey pants?

Over. A pant shell pulls on over hockey pants as the outermost layer, the same way a jersey goes over shoulder pads. Players who wear a girdle instead of traditional pants also wear the shell over the girdle. Wearing a shell underneath pants defeats the purpose, since nobody would see the team colors.

What size hockey pant shell should I order?

Size a pant shell off the hockey pants it will cover, not off pant waist size or jersey size. Puck Drop Prints publishes nine player shell sizes, from Youth S at a 16-inch relaxed waist to Adult 2XL at 24 inches, each listing waist, length, and hip in inches. When a measurement falls between two sizes, order the larger one.

Are hockey pant shells padded?

No. A hockey pant shell contains no foam, no hard caps, and no protective padding of any kind. It is a fabric cover only. Protection comes entirely from the hockey pants or girdle worn underneath, and a shell should never be worn on its own as a substitute for padded pants.

Can goalies wear pant shells?

Yes. Puck Drop Prints publishes a separate goalie pant shell chart with nine sizes, cut wider in the waist and shorter in length than the player pattern to fit over goaltender equipment. An Adult Goalie M measures 22.5 inches at the relaxed waist against 21 inches for the Adult M player cut.

Do pant shells work for roller hockey?

Roller hockey uses full-length roller pants, often called Cooperalls, rather than a short shell. Puck Drop Prints publishes a nine-size roller chart running from Youth S at a 24 to 26 inch waist up to 3XL at 40 inches. Cooperalls cover the leg to the ankle and are worn without hockey socks.

Ready to match from the waist down?

Send over your team colors and a rough roster count and Puck Drop Prints will come back with a design, sizing help, and a real number. Create your logo in ChatGPT, then bring the artwork to Puck Drop Prints with your order request.

Start Your Order, or read the FAQ if you have one more question before you commit the boys to anything.

Back to blog